en English

Microcomputer Pulse Repair Battery Charger

Category Tag

The red clip is connected to the positive terminal of the battery and the black clip is connected to the negative terminal of the battery
Left switch: Press the top to perform smart charging, also suitable for dry batteries. Press the following, high-voltage maintenance, also applies to water batteries.
Right switch: Press the button on the top to cut off the power to stop charging, and press the button on the bottom to connect to the power.

Additional information

Input voltage

AC:140-245V 40-60Hz

Output voltage

DC9-16V (12V battery)

Output current

DC 20A

Suitable battery

12V 20AH-200AH

Product Details

Constant Current | Voltage Limit

Microcomputer Pulse Repair Battery Charger

Applicable Scene

Car

Motorcycle

ATV

Motorboat

Product Parameter

Input voltage: AC: 140-245V 40-60Hz
Output voltage: DC9-16V (12V battery)
Output current: DC 20A
Suitable battery: 12V 20AH-200AH

Professional Production Line

Our company has a standard workshop more than 8,000 square meters. We have more than 200 workers, with senior technical staff accounting for 30%.

We believe that with our high-quality products and considerate service, we can satisfy the demands from both you and the end users. Hopefully our wide range of charger products can assist your marketing and sales.

Product Manual

Safety Precautions
1. It is strictly forbidden to charge scrap, non-lead-acid batteries or non-voltage batteries. There is high voltage inside the machine and it is strictly prohibited to disassemble it without permission. Open flames are forbidden when charging.

2. When charging the vehicle or equipment, please remove the battery and place it in a safe, non-tin-burning space around it for charging, otherwise an accident will occur and you are responsible for it!
3. When the charging time exceeds 12 hours, the power supply should be cut off and long-term charging is strictly prohibited.

4. It is forbidden to charge non-rechargeable batteries
5. For indoor use, beware of rain. During the charging process, the charger must not be covered and must be placed in a well-ventilated place. It is strictly forbidden to charge in or on the car, beware of flames, sparks and explosive gases to avoid fire.

6. If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department or similar full-time personnel
7. Before connecting or disconnecting the battery charger and the battery, disconnect the power supply.

WE WANT TO COOPERATE WITH YOU

If this product is what you are looking for, just feel free to request a quote.

Ask For Quote Now

Please be sure the information you fill in is correct, otherwise we will not be able to contact you in time. Your personal information will be kept in privacy, and your email will be replied within 24 hours.